现代格力空调到了设置温度，怎么不停啊，继续制冷，怎么办_3

格力空调到了设置温度，怎么不停啊，继续制冷，怎么办空调到了设定温度后继续制冷

空调制冷原理:调节器通电后，制冷系统内制冷剂的低压蒸汽被吸入压缩机，压缩成高压蒸汽，再进入冷凝器。同时，轴流风机吸入的室外空气流经冷凝器，带走制冷剂释放的热量，将高压制冷剂蒸汽冷凝成高压液体。与室外空气热交换后，成为中温中压制冷剂液体。经过节流减压，在毛细管中冷却后，进入蒸发器，在相应的低压下蒸发，吸收周围的热量。同时，横流风机使空气连续进入蒸发器翅片进行换热，并将放热后的冷空气送至室内。这样，室内空气不断循环流动，达到降温的目的。

空调将室内调到了设定温度后是不是就停止工作了，，不再吹冷气出来了。Device temperature control according to the set temperature detected indoor temperature, inlet temperature has reached ",will issue instructions to the compressor stop working outdoor, indoor machine work in the ventilation state in cooling mode at this time, the wind outlet is indoor environment temperature (now the city government regulations in public places of set temperature refrigeration shall not be lower than 26 degrees, heating shall not be higher than 20 degrees),According to room temperature in the smothering of insulated sealing and heat source (mainly refers to the number of people), the temperature will gradually recover, And the temperature control device probe to detect the temperature higher than the set point 1 ~ 2 inches,will again start the compressor into refrigeration mode, so that indoor temperature will fluctuate in refrigeration "is normal, Because the compressor stop running,Temperature control there will be a control area (generally for 2 ~ 3 degrees),that is to say, smothering the environment temperature should be in the set temperature within the plus or minus 1 ~ 2 degrees of change, so the temperature sensitive person recommend the use of frequency conversion air conditioning, the compressor in the environment temperature reaches set temperature kept running at low speed, Complement the loss of air conditioning,Keep the room at the set temperature of plus or minus 0.5 degrees.格力空调到了设定的制冷温度后不及时启动

我建议你去官方的维修部门，让他们派人带你去看看。这可能是硬件问题。如果外部机器不工作，没有制冷，只有内部机器吹，可能是内部机器的温度传感包有问题。你可以买一个温度计来测试机器内部出风口的温度。如果房间温度达到25度，遥控器设置为26度，而出风口温度低于16度，那么空调可能有问题。当然，要确保空调达到设定温度是要继续制冷(机器外工作正常)还是只是机器内风扇在工作(机器外不运行)。

格力空调到了设置温度，怎么不停啊，继续制冷，怎么办这是事实，室温到25°室外.